Dynasty® 200 Series
WELDING MACHINE TIG (GTAW)

Dynasty 200 DX Wireless Remote Foot Control Complete

Dynasty 200 DX power source

Quick Reference Guide:
English | Spanish

8 ft (2.4 m) primary cord

(2) Dinse 50 mm connectors

2-Wheel Trolley Cart

Coolmate™ 1 Cooler 120VAC

Coolant (1 gallon)

Wireless Remote Foot Control

25 ft (7.6 m) Weldcraft® WP20
   water-cooled torch

Torch accessory kit with tungsten

•    Shielding Cups
•    Collets-1/16, 3/32, 1/8
•    Collet Bodies-1/16, 3/32, 1/8
•    2% Cerium Tungsten-1/16, 3/32, 1/8

15 ft (4.6 m) work lead w/clamp

Gas hose

Smith Regulator/flowmeter

Torch Cable Cover

Welding Capability Not to scale
Aluminum Min.	0.020" (0.5 mm)
Steel Min.	0.004" (0.1 mm)
Aluminum Max.	1/4" (6.4 mm)
Steel Max.	1/4" (6.4 mm)

Blue Lightning™ - High Frequency Arc Starter for TIG non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. Easy to set up and increases productivity.

Compatible with Wireless Remote Controls. Improve productivity, eliminate clutter and cord tangles in the work area. Eliminate cord failure and associated downtime/repair costs and extend the operator's welding range without adding cord extensions.

---

AC TIG Features

Extended AC Balance (30-99%) controls the amount of oxide cleaning (amperage time in EN) which is essential for high quality welds on aluminum.

AC frequency (20-250 hz) controls the width of the arc cone and the force of the arc.

AC Waveforms

Advance Squarewave, fast freezing puddle, deep penetration, and fast travel speeds.

Soft Squarewave for a soft buttery arc with maximum puddle control and good wetting action.

Sine wave for customers that like a traditional arc. Quiet with good wetting.

Triangular wave reduces the heat input and is good on thin aluminum. Fast travel speeds.

---

DC TIG Features

Exceptionally smooth and precise arc for welding exotic materials.
Built-in pulser reduces heat input; adds arc stability (DX model only).

---

Stick Features (AC/DC)

Tailored arc control (DIG) allows the arc characteristics to be changed for specific applications and electrodes. Smooth running 7018 or stiffer, more penetrating 6010.

Hot Start™ adaptive control provides positive arc starts without sticking.

AC frequency control adds additional stability when Stick welding in AC for smoother welds.

Low OCV Stick is a simple design that reduces open-circuit voltage to 5-10 VDC when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers.